Steel Palisade Fencing
Palisade Fencing is a great solution for locations which need to provide a high level of security. This permanent security fencing system offers great strength and longevity and is perhaps the most traditional form of security fencing. By installing a steel Palisade Security Fencing system around the perimeter of a site, premises can be kept secure at all times as it’s robust construction and intimidating appearance works as an effective intrusion and theft deterrent. Palisade Fencing also functions as effective boundary demarcation and this can be enhanced through the additional of a polyester powder coated finish.
Designed to provide security and protection in a wide range of outdoor locations, Palisade Security Fencing can be erected on hard ground like concrete by using steel Bolt Down Posts, or on softer ground like grass, where Dig-In Posts are set within the ground. Palisade Fencing is designed for permanent installation and can also be installed on both level ground and sloping ground which has a gradient no greater than 30 degrees; as it can be assembled to run parallel to the ground without the need for stepping.
Palisade Fencing can also be adapted to meet site access requirements and we offer a range of pedestrian and vehicle access gates in heights from 1.8m to 3.0m and in widths ranging from 1.2m to 10.0m. Adding a Palisade Security Gate within your Palisade Fencing system will provide a controllable access point which can be locked to ensure security is maintained at all times.
Our Palisade Security Fencing and Palisade Gates are made from cold rolled steel and are galvanised with a protective zinc coating to help prevent rust over time. This galvanised finish meets the BS EN ISO 1461:2009 standard.
Locations and Functions
As Palisade Fencing offers dependability and a high level of security, you will often see it in a variety of private, public and commercial places. Examples of where Palisade Fencing is used include:
- Industrial sites
- Businesses that have large amounts of stock
- Commercial establishments
- Water treatment plants and power stations
- Bus and railway stations
- General fencing for establishing boundaries
Our Palisade Fencing is supplied with ‘W’ & section steel pales which means that they have a thinner middle section, with thicker edges which curve inwards. The ‘w’ shape profile of these Palisade pales ultimately provides the Palisade Fencing with greater strength and stability, as well as making them difficult to grip or climb. The Palisade Fencing is supplied with triple pointed steel pales as standard, however, we also offer single pointed pales, plus round and notched pales. These steel Palisade pales are what makes Palisade Fencing such as recognisable security fencing system.
Steel Palisade Fencing also features two steel rails within it’s construction – a top rail and a bottom rail. The top Palisade Rail also has small barbs along the top, which helps to deter intruders from climbing over the fencing structure.
All our Palisade Fencing is secured with anti-tamper fixings which are designed specifically for Palisade Fencing. Offering a secure connection, the bolt will fit tightly within the bolthole where the top section of the nut will snap off. Therefore, the bolts cannot be tampered with or removed once the Palisade Fencing has been installed.
If you have any perimeter or other security related fencing problem please feel free to contact us directly on 01902 782081 or alternatively complete our online contact form.
We respond to all enquiries promptly and we look forward to hearing from you.
ARE YOU LOOKING FOR COMMERCIAL OR DOMESTIC FENCING SOLUTIONS
CALL 01902 782 081
Fordhouse Road Ind Estate,
Tel: 01902 782081
Staffordshire North wales
East Midlands Shropshire
Worcestershire West Midlands
North West England